No reserve I have for sale a 1977 Datsun 280z with a lot of the hard work done to it. Will just need body work finished and misc parts to get it running. It has a professionally built Chevy aluminum block 5.3L V8 LM4. Built for 500HP+. I have tape to protect from any dirt/dust getting inside the engine. With Forged internals and ARP bolts. Combined with a 4L80 Automatic performance-built transmission. I installed a full Cxracing Damper Coilovers Suspension Kit. With adjustable coil overs all around. The brakes are brand new as well with new calipers, pads, and freshly bled. The whole drive train is built and installed. the engine will need an intake and computer that is it. (I suggest a Fi-tech system) I was building it to be a weekend warrior, but ran out of time. My lose is your gain. There has already been a lot of time and money into this car. The engine and trans alone have 10k into them. I have a list of parts included in this listing bellow. All the metal panels have been taken down to bare metal and primed. The whole underside has been bed lined. The engine bay has been painted black but may need more work to really pop. The roof is in need of some work. The body panels I am missing are the Doors, Hood, Rear Hatch, Fenders, Front headlight cones, cowl, grill, and front blinkers. Interior I don't have the seats, gauges, or wiring. I have, all the glass, boxes of parts, and a set of tires on the car that go with it as seen in the photos. The glass is all in good shape other than a chip along the bottom edge of the windshield but it is still usable. This is a project, but a lot of hard work has been done already and especially all the high end upgrades.There is also boxes of parts as well. If you have any questions or want to find a time to see it message any time. The 3rd and 4th photos are to show that the underside and engine bays where painted. The engine and drivetrain is installed.
I can offer shipping services, but cost would vary. It depends on location and time. Shipping cost is separate from auction sale price.
-New front spoiler included with mounting hardware
-The cowl, fenders, and front grill where in bad shape so I sold them because they would have needed a lot of work.
-The body has been undercoated
-The engine bay has been sanded to bare metal, sealed up, primed, and painted black. It could use some more work to make it perfect.
-The body has been taken down to bare metal and primed. The rear marker lights and bumper mounts have been removed.
-The roof of the car may need replacement or repair by a good auto-body shop.
-Will need Hood, rear hatch, and doors.
-All the Glass is included (Both door glass and hardware, Both quarter windows, Rear hatch, and front windshield)
Interior panels includes and misc stuff:
-Both Door panels
-Rear tail light cover
-Both rear trunk cover panels
-Professionally built by side street Machinist (Have receipts)
-Master gasket kit Fel-Pro
-Wesco forged Pistons
-ARP Head bolts
-ARP Connection rod bolts
-Clevite engine bearings
-Howered Cam with new LS3 Lifters, Valves, push-rods, springs, and double chain cam wheel.
-All aluminum block for lightness
-Professionally built heads too.
-Radiator installed brand new aluminum
-All the serpentine stuff needed to get it running minus belt
-Brand new alternator
-Brand new high volume water pump
-Brand new belt tensioner designed by billet
-Cxracing Damper Coilovers Suspension Kit
-Arizona Speed front and rear sway bar
-Arizona Speed Front lower control arms
-Arizona Speed bushing kit
-New front wheel bearings installed too
-Fully rebuilt rack and pinion with new tie rods and interior boots as well as bushings.
- Will need alignment when bodywork and car is finished assembled.
-Disc break upgrade in front
-New drums in rear
-Completely installed and bled
-All Star Transmission Built for performance 4L80
-Lokar Automatic shiftier installed
-Lokar Automatic shiftier indicator ring to show what gear the shiftier in.
-Transmission installed with broken kitty mount kit
-Driveshaft made and professionally installed from broken Kitty
-R200 with LSD upgrade
-New bearings and professionally built and installed. I have receipts.
|“A completely rust free project in need of some bodywork and a few finishing touches.” |
| Year: || 1977 || VIN (Vehicle Identification Number): || HLS30388682 |
| Mileage: || 0 || Transmission: || Automatic |
| Make: || Datsun || Body Type: || Coupe |
| Model: || Z-Series || Warranty: || Vehicle does NOT have an existing warranty |
| Trim: || 280Z "No Reserve" || Vehicle Title: || Clear |
| Engine: || V8 || Fuel Type: || Gasoline |
| Drive Type: || RWD || For Sale By: || Private Seller |
| Drive Side: || Left-hand drive || Exterior Color: || Gray |
| Manufacturer Interior Color: || Black || Interior Color: || Black |
| Manufacturer Exterior Color: || Blue || Number of Cylinders: || 8 |
| Number of Doors: || 2 Doors |